Reasons for Non - standard Accuracy of Small - sized CNC Lathe
1, small CNC lathe rigid enough
Such as the pallet trolley loosening, transmission imbalance caused by vibration.Of course, the instability of the lathe can also cause vibration, due to vibration caused by the workpiece surface roughness reduced.
2, lack of rigidity caused by vibration
So as far as possible the use of thick knife bar to reduce the length of a tool to extend; workpiece rigidity can cause vibration, so when turning slender shaft center frame to use, or use a folder to replace the two top-level folder.
3, small CNC lathe turning part of the geometric parameters is not correct
According to the cutting characteristics of the workpiece material selection of reasonable and appropriate cutting angle, reduce the surface roughness.
4, due to the generation of BUE, so that the surface roughness of the workpiece is very strong
When cutting, because of the involvement of BUE, the surface of the workpiece appears a nap or ditch the phenomenon of groove, turning should try to avoid it. Combined with the above reasons, processing should be aware of early prevention, to eliminate the problem in the bud, to improve the accuracy of the workpiece to meet the design requirements.
The above content describes the precision of small CNC lathe table is not up to the accuracy of the reasons, the main products of Tai'an sea of ​​machinery: horizontal inclined bed CNC lathes, vertical CNC lathes, CNC turning centers, CNC lathes, CNC milling machine, CNC machining center , Select the number of sea, choose Su always feel right, order the phone 13953800780.
    http://m.daweidata.cn/